Product ID:10210 PLASTIC STEEL LIQUID RESIN
MSDS Date:02/13/1996
FSC:8030
NIIN:00F054478
MSDS Number: CFXYQ

Emergency Phone: 508-777-1100

Info Phone: 508-777-1100

Cage: 16059

Telephone: 1-508-777-1100

Cage: 16059

BISPENOL-A BASE EPOXY RESIN *97-3*

CAS: 25088-38-6

Fraction By Weight: 30-80%

LD50 LC50 Mixture:ORAL LD50(RAT): 30 G/KG (SEE SUPP)
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: MAY CAUSE MODERATE IRRITATION,
THERMAL BURNS, SENSITIZATION. EYES: MAY CAUSE MODERATE IRRITATION,
THERMAL BURNS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, THERMAL BURNS, RASHES, HIVES,
GASTRIC DISTRESS, ITCHING, SWELLING.
Medical Cond Aggravated by Exposure:PRE-EXISTING EYE & SKIN DISORDERS.

First Aid:EYES: FLUSH W/CLEAN WATER FOR 15 MINS. SKIN: FLUSH W/WATER.
WASH THOROUGHLY W/SOAP & WARM WATER. INHALATION: REMOVE TO FRESH
AIR. GIVE OXYGEN IF BREATHING IS DIFFICULT. INGESTION: DON'T INDUCE
VOMITIN G. GIVE 2 GLASSES OF WATER TO DILUTE IFCONSCIOUS. OBTAIN
MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:PMCC
Flash Point:>400F
Extinguishing Media:CO2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR A SCBA & PROTECTIVE CLOTHING. DON'T ENTER
CONFINED SPACES W/O FULL BUNKER GEAR. COOL FIRE EXPOSED CONTAINERS
W/WATER.
Unusual Fire/Explosion Hazard:MATERIAL WILL NOT BURN UNLES PREHEATED.
HEATING >300F IN PRESENCE OF AIR MAY CAUSE SLOW OXIDATIVE
DECOMPOSITION & >500F MAY CAUSE POLYMERIZATION.

Spill Release Procedures:AVOID PERSONAL CONTACT. REMOVE IGNITION
SOURCES. VENTILATE AREA. DIKE, CONTAIN & ABSORB W/CLAY, SAND/OTHER
SUITABLE MATERIAL. LARGE: PUMP TO STORAGE/SALVAGE VESSELS. SOAK UP
RESIDUE W/AN ABSORBENT SUC H AS CLAY, SAND/OTHER SUITABLE MATERIAL.
(SUPP)

Handling and Storage Precautions:STORE IN A COOL, DRY AREA AWAY FROM
HIGH TEMPS & FLAMES. HANDLE MIXED RESIN & HARDENER IAW/POTENTIAL
HAZARD OF CURING AGENT USED.
Other Precautions:AVOID CONTACT W/SKIN, EYES/CLOTHING. PROVIDE
APPROPRIATE VENTILATION/REPIRATORY PROTECTION AGAINST DECOMPOSITION
PRODUCTS DURING WELDING/FLAME CUTTING OPERATIONS & TO PROTECT
AGAINST NUISANCE DUST DUR ING SANDING/GRINDING OF CURED PRODUCT.

Respiratory Protection:NONE NEEDED IN NORMAL USE W/PROPER VENTILATION.
WEAR A NIOSH APPROVED ORGANIC VAPOR CARTRIDGE FOR UNCURED RESIN &
DUST/PARTICLE RESPIRATOR DURING GRINDING/SANDING OPERATIONS OF
CURED RESIN AS EXPOSURE LEVELS DICTATE.
Ventilation:LOCAL EXHAUST:RECOMMENDED FOR CONFINED AREAS, PREFERED.
MECHANICAL (GENERAL): ADEQUATE FOR MOST INDUSTRIAL APPLICATIONS.
Protective Gloves:CHEMICAL-RESISTANT
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS
Other Protective Equipment:OTHER GEAR AS REQUIRED, EMERGENCY SHOWER,
EYE WASH
Work Hygienic Practices:REMOVE/CLEAN CONTAMINATED CLOTHING BEFORE
REUSE. WASH THOROUGHLY AFTER HANDLING. DISCARD CONTAMINATED LEATHER
ARTICLES.
Supplemental Safety and Health
ORAL LD50 INFORMATION IS FOR BISPHENOL A DIGLYODYL ETHER RESIN. SPILLS:
FLUSH AREA W/WATER TO REMOVE TRACE RESIDUE. PREVENT FROM ENTERING
DRAINAGE/SEWER SYSTEMS, WATERWAYS & SURFACE WATERS.

Boiling Pt:B.P. Text:>500F
Vapor Pres:0.03
Vapor Density:>1
Spec Gravity:2.8
pH:7
Evaporation Rate & Reference:(BU AC =1): <1
Solubility in Water:NEGLIGIBLE
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
STRONG LEWIS/MINERAL ACIDS, STRONG OXIDIZING AGENTS, STRONG MINERAL &
ORGANIC BASES, PRIMARY & SECONDARY ALIPHATIC AMINE
Stability Condition to Avoid:EXTREME HEAT/OPEN FLAME, OTHER IGNITION
SOURCES.
Hazardous Decomposition Products:BY COMBUSTION/ELEVATED TEMP (>500F)
DEGRADATION: OXIDES OF CARBON, ALDEHYDES, ACIDS & OTHER ORGANIC
SUBSTANCES.
Conditions to Avoid Polymerization:HEAT IS GENERATED WHEN RESIN IS
MIXED W/CURING AGENTS. RUN-A-WAY CURE REACTIONS MAY CHAR &
DECOMPOSE RESIN.

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.